Root Cutting and Removal Before Lining in Nashville and Middle Tennessee
Roots that have grown into a sewer pipe have to come out before a liner goes in. Cutters and jetters clear the pipe so the liner can seat.
- Inspection and Preparation
- Works from existing access
- Middle Tennessee

Root Cutting and Removal Before Lining, explained.
Tree roots are drawn to the moisture and nutrients in a sewer line and get in through joints and cracks. Inside the pipe they grow into dense mats that slow flow, catch debris and cause backups. A liner cannot be installed through a mat of roots.
We cut roots with a chain cutter or other mechanical head on a cable, then follow with a jetter to wash the pieces out. Roots that have pushed into the joints are trimmed flush with the pipe wall. A camera shows the pipe before and after so you can see the result. Cutting is only half of the fix: lining closes the openings so the roots cannot return.
Signs this service fits
- Slow drains from root intrusion
- A camera shows roots at joints or across the pipe
- Backups return every few months
- A liner or patch is planned
A good fit, and what to know.
We would rather you hear the limits from us than discover them later.
A good fit when
- Root-damaged clay and cast iron pipe
- Lines headed for lining or patching
- Properties with big trees near the line
Worth knowing
- Cutting without sealing the entry points is a temporary fix
- Heavily damaged pipe may not survive cutting and may need replacement
Why choose this one.
Clear pipe
Flow returns and the pipe is ready for the next step.
Trimmed at the wall
Cutting flush leaves a surface a liner can seat on.
Documented
Camera video shows before and after.
A real plan
Seeing the entry points shows how much lining or patching is needed.
From first look to finished pipe.
A clear sequence for every job.
- 01
See the roots
A camera shows where roots enter and how dense they are.
- 02
Cut them back
A cutter head trims roots flush with the pipe wall.
- 03
Jet the pieces out
Water flushes the root fragments out of the line.
- 04
Verify and plan
A camera pass confirms the pipe is clear and ready for lining or a patch.
Services that go together.
D-01ProblemsRoot Intrusion RepairRoots enter through joints and cracks. We cut them out, then line the pipe so the openings they…No digSee the service
C-02InspectionHydro-Jetting Before LiningA liner can only bond to a clean pipe. High-pressure water scours grease, scale and debris out of…No digSee the service
A-04CIPP LiningSpot and Point RepairWhen a camera shows damage in only one or two places, a short patch liner can repair them…No digSee the service
A-01CIPP LiningFull-Length CIPP LiningA resin-soaked liner is cured inside your old sewer pipe from end to end, leaving a smooth new…Small access pitSee the service Read more on this topic.
GUIDE 12 · Sewer Lines 101Tree Roots and Sewer LinesWhy roots find your pipe, what they do inside it and how to keep them out for good.2 min read
GUIDE 26 · Trenchless MethodsWhy Hydro-Jetting Comes Before LiningA liner is only as good as the surface it sits on. Here is what jetting does and why it…2 min read
GUIDE 37 · Care and PreventionHow to Protect Your Sewer LineSimple habits that keep the pipe flowing and make repairs less likely.2 min read Root Cutting Before Lining FAQ.
Will the roots come back?
Without closing the openings they usually do. Lining or patching the joint removes the way in.
Do roots kill the tree if you cut them?
We cut roots only inside the pipe, not outside it, so the tree’s main roots are not touched.
Does root killer help?
Foaming products can slow regrowth for a time, but they do not repair the pipe. Lining is the lasting step.
Root Cutting Before Lining across Middle Tennessee.
Pick your city for its page.
Fix the pipe. Keep the yard.
Tell us about your pipe and we will suggest a camera inspection and the least disruptive repair that fits.


